CelciuXº
CelciuXº - Multi-Loop temperature control - Control and Connectivity
CelciuXº is designed to handle complex temperature profiles thanks to Omron’s unique Gradient temperature Control (GTC) algorithm and to offer easy program-less communication with Omron and third-party PLCs and HMI. Above all, CelciuXº (EJ1) incorporates all “simple to use” clever temperature control technology, like 2-PID, disturbance control and various ways of tuning.
- Interfaces to a wide range of industrial networks
- Reduced engineering due to Programm-less communications, Smart Active Parts and Function Block Libraries
- Available with screw terminals and screw-less clamp terminals
- One unit handling various types of input, such as Pt, Thermocouple, mA, and V input
- Gradient Temperature Control
Applikationer
Præcis styring af 2D-temperaturprofiler
GTC (Gradient Temperature Control), Omrons unikke PID-styringsteknologi med loop-interaktion, sikrer, at en 2-dimensionel temperaturprofil forbliver konstant over et defineret område og dermed eliminerer skadelige effekter forårsaget hotspots på materialeflader som f.eks. metal, glas, plastic eller silikone-wafere. GTC gør det muligt at styre temperaturprofilens nøjagtige form i en hvilken som helst position.
Den perfekte løsning til styring af flere loops
Pålidelig, kompakt og kompromisløs styring betyder, at CelciuX° er det perfekte valg til grundlæggende styring af flere loops.
Maskinregulering med flere loops med HMI
Styring, overblik og datalogføring kunne ikke være bedre og nemmere end med CelciuX° kombineret med en direkte tilslutning til Omrons HMI’er.
Ordering information
|
2 transistor (NPN) 1 |
2 CT input 2 + 2 event input |
|||||
|
2 transistor (NPN) 1 |
2 CT input 2 + 2 event input |
|||||
|
2 transistor (NPN) 1 |
||||||
|
2 transistor (NPN) 1 |
||||||
|
Ethernet unit3 |
||||||
|
End unit 4 |
||||||
|
End unit 4 |
|
2 voltage (pulse)5 |
2 CT input6 |
|||||
|
2 voltage (pulse)1 |
2 CT input2 |
|||||
|
4 voltage (pulse)1 |
||||||
|
4 voltage (pulse)1 |
||||||
|
End unit7 |
||||||
|
End unit3 |
Accessories
Current transformer
Communications and cables
Specifications
|
Input (see note)8 |
Thermocouple: K, J, T, E, L, U, N, R, S, B, W, PLII |
||
|
Output voltage: 12 VDC ±15%, max. load current: 21 mA (PNP models with short-circuit protection circuit) |
|||
|
Current output range: 4 to 20 mA or 0 to 20 mA DC
(Resolution: Approx: 2,800 for 4 to 20 mA DC, |
|||
|
ON: Residual voltage: 1.5 V max., |
|||
|
ON/OFF control or 2-PID (with autotuning, selftuning, Heat & Cool autotuning and non-linear cool output selection) |
|||
|
Two-point input shift, digital input filter, remote SP, SP ramp, manual manipulated variable, manipulated variable limiter, interference overshoot adjustment, loop burnout alarm, RUN/STOP, banks, I/O allocations, etc. |
|||
|
Operating -10°C to 55°C, Storage -25°C to 65°C (with no icing or condensation) |
|||
Dimensions
1.
For heating/cooling control applications, the auxiliary outputs on the 2-point models are used for cooling control.
On the 4-point models, heating/cooling control can be performed for two input points only.
2. When using the heater burnout alarm, purchase a Current Transformer (E54-CT1 or E54-CT3) separately.
3. This unit mounts to the left of the CelciuX° (EJ1) configuration and enables PROFINET or Modbus/TCP network connection. Combine the HFU-ETN with an EDU_-NFLK end unit to use with other devices supporting Modbus-RTU like E5_N temperature controllers and MX2 Inverters.
4. An End unit is always required for connection to a Basic unit or an HFU. An HFU cannot operate without a Basic unit.
6. When using the heater burnout alarm, use a Current Transformer (E54-CT1 or E54-CT3) (sold separately).
1.
For heating/cooling control applications, the auxiliary outputs on the 2-point models are used for cooling control.
On the 4-point models, heating/cooling control can be performed for two input points only.
2. When using the heater burnout alarm, purchase a Current Transformer (E54-CT1 or E54-CT3) separately.
3. This unit mounts to the left of the CelciuX° (EJ1) configuration and enables PROFINET or Modbus/TCP network connection. Combine the HFU-ETN with an EDU_-NFLK end unit to use with other devices supporting Modbus-RTU like E5_N temperature controllers and MX2 Inverters.
4. An End unit is always required for connection to a Basic unit or an HFU. An HFU cannot operate without a Basic unit.
6. When using the heater burnout alarm, use a Current Transformer (E54-CT1 or E54-CT3) (sold separately).
EJ1N-HFU-ETN
PRT1-SCU11
CX-Thermo
CX-One
CX-Supervisor
Brochurer
Vis alle brochurer
Datablade
Manualer
Abonnér på produktopdateringer
Nyhedsbreve om produktinnovationer, løsninger og serviceydelser direkte i din indbakke.
Kurser
Bliv uddannet af vores bedste ingeniører. Fra begynder til udvidet niveau.
Se tilgængelige kurser