Vi har desværre tekniske problemer. Din formular er ikke modtaget. Vi undskylder og beder dig om at prøve igen senere. Detaljer: [details]

get direct access

Fill in your details below and get direct access to content on this page

Vi har desværre tekniske problemer. Din formular er ikke modtaget. Vi undskylder og beder dig om at prøve igen senere. Detaljer: [details]

Download

NX-ID6142-6

32 Digital Inputs, Standard speed, NPN/PNP 24 VDC, FCN40 connector (not included), 30 mm wide

Accessories

NX-series Digital I/O Unit - NX-ID/IA/OD/OC/MD Datablad

enPDF 4,49 MB

CAD Bibliotek

Specifications

I/O system	NX I/O Bus
Type of module	Digital I/O
Number of digital inputs	32
Digital input type	PNP/NPN
Permitted voltage at input	19-28.8 V
OFF/ON delay	0.02-0.4 ms
Number of digital outputs	0
Digital output type	None
Short-circuit protected outputs
Connection method	1-wire
Signal processing	Free running, Standard speed, Synchronous
IO-Link master
I/O connection type	FCN (plug not included)
Number of I/O connectors	1
Detachable I/O connector
Suitable for safety functions
SIL according to IEC 61508	None
Communication port(s)	None
Number of IOV (V+) terminals	0
Number of IOG (V-) terminals	0
Number of COM terminals	4
Degree of protection (IP)	IP20
Product Weight (unpacked)	150 g

Tilbehør

	G70V-SID16P	Relay terminal, PLC Input, 16 channels, NPN, Push-in terminals
	G70V-SID16P-1	Relay terminal, PLC Input, 16 channels, PNP, Push-in terminals
	P2RV-4-100IFC	G2RV interface cable for use between CJ1W-ID231/ID233/ID261 and 4 P2RV-8-I-F modules, 1 m
	P2RV-4-200IFC	G2RV interface cable for use between CJ1W-ID231/ID233/ID261 and 4 P2RV-8-I-F modules, 2 m
	P2RVC-8ST-I-5	Interface unit for G2RV-SR/G3RV-ST Push-in, PLC Input, 8 channels, NPN, 30 VAC/DC, Total 2 A, Push-in
	P2RVC-8ST-I-5-1	Interface unit for G2RV-SR/G3RV-ST Push-in, PLC Input, 8 channels, PNP, 30 VAC/DC, Total 2 A, Push-in
	P2RVC-8ST-I-7-1	Interface unit for G2RV-SR/G3RV-ST Screw, PLC Input, 8 channels, PNP, 30 VAC/DC, Total 2 A, Rising-up screw
	XW2D-20G6	General-purpose I/O terminal block, MIL20 socket, M3 captive screws, 20 points
	XW2D-40G6	General-purpose I/O terminal block, MIL40 socket, M3 captive screws, 40 points
	XW2K-40G-O32A	PLC interface wiring system with push-in plus technology and power supply terminal, 40 points MIL connector, Input/Output, Signal: 0.5 A, Power: 7 A, NPN/PNP, 30 VDC, DIN rail horizontal and vertical mounting
	XW2Z-0100BF-L	I/O connection cable, unshielded, FCN40 to MIL40, 1 m
	XW2Z-0100BH-L01	I/O connection cable, unshielded, FCN40 to 2 x MIL20, 1 m
	XW2Z-0100BN-L	I/O connection cable, unshielded, FCN40 to open ends, 1 m
	XW2Z-0200BF-L	I/O connection cable, unshielded, FCN40 to MIL40, 2 m
	XW2Z-0200BH-L01	I/O connection cable, unshielded, FCN40 to 2 x MIL20, 2 m
	XW2Z-0200BN-L	I/O connection cable, unshielded, FCN40 to open ends, 2 m
	XW2Z-0300BN-L	I/O connection cable, unshielded, FCN40 to open ends, 3 m
	XW2Z-050B	I/O connection cable, FCN40 to MIL40, 0.5 m
	XW2Z-100B	I/O connection cable, FCN40 to MIL40, 1 m
	XW2Z-100D	I/O connection cable, FCN40 to 2 x MIL20, 1 m
	XW2Z-150B	I/O connection cable, FCN40 to MIL40, 1.5 m
	XW2Z-200B	I/O connection cable, FCN40 to MIL40, 2 m
	XW2Z-200D	I/O connection cable, FCN40 to 2 x MIL20, 2 m
	XW2Z-300B	I/O connection cable, FCN40 to MIL40, 3 m
	XW2Z-RI100C-75	I/O connection cable, with shield connection, FCN40 to 2 x MIL20, 1 m / 0.75 m
	XW2Z-RI200C-175	I/O connection cable, with shield connection, FCN40 to 2 x MIL20, 2 m / 1.75 m