ZX2

Funktioner

Stabil, enkelt og økonomisk laserafstandsmåler

Stor præcision og målestabilitet til en overkommelig pris. Den nye ZX2 lasersensor har den bedste ydelse i sin klasse med hensyn til præcision og hastighed til alle lineære forskydningsformål. Ved brug af en avanceret HSDR-CMOS billedsensor opnås høj målestabilitet, selv på de mest udfordrende overflader.

  • Opsætning vha. en enkelt berøring
  • Præcision: 1,5–5 µm
  • Alle former for overflader
  • Høj hastighed: 30 µs

HSDR CMOS billedsensor

ZX2_CMOS.jpg
ZX2 benytter en nyudviklet High Speed & Dynamic Range (HSDR) CMOS billedsensor. Herved opnås stabil måling på overflader lige fra meget absorberende til meget diffuse uden tab af præcision. ZX2 overvåger kontinuerligt det indgåede lysniveau og justerer laserdiodens effekt med hensyn til kompensering, alt sammen inden for en cyklus på 60 μs.

Nem konfiguration

ZX2_Smart button.jpg
ZX2 nem konfiguration. ZX2 eliminerer behovet for kompleks konfiguration gennem omstændelig justering af parametrene. Der anvendes en intelligent tast til at konfigurere sensoren ved at definere den type overflade, der skal måles.  
  • En type overflade
  • Flere typer overflade
  • Meget diffuse overflader
Alle andre indstillinger konfigureres automatisk ud fra denne indstilling.

Applikationer

ZX2_App_double sheet.jpg

Registrering af dobbeltark

Den høje præcisionsmåling og evnen til at behandle skiftende typer overflader giver ZX2 mulighed for at blive anvendt til inspektion af dobbeltark.
ZX2_App_robot.jpg

Positionsreference

Der kan udføres nøjagtige lineære målinger med høj hastighed, hvor ZX2 bliver anvendt til positionsreferencefunktioner i høj hastighed.
ZX2_App_thickness.jpg

Måling af tykkelsen

Måling af tykkelsen udføres enkelt i ZX2 takket være beregningsenheden. Der kan udføres nøjagtige målinger af tykkelsen selv på yderst diffuse overflader.
ZX2_App_warpage.jpg

Måling af skævhed

Ved at anvende flere ZX2-enheder er det muligt at inspicere skævheden eller afbøjninger i komponenter. Selv hvor temperaturen eller måleoverfladen varierer, kan der stadig opnås stabile målinger.
Specifikationer & bestillingsinfo

Ordering information

Sensor heads

Optical system

Beam shape

Sensing distance

Resolution

Order code

Diffuse-reflective

Line beam

 

1.5 µm

ZX2-LD50L

Spot beam

ZX2-LD50

Line beam

 

5 µm

ZX2-LD100L

Spot beam

ZX2-LD100

Regular reflective

Spot beam

 

1.5 µm

ZX2-LD50V

Amplifier units

Power supply

Output type

Order code

DC

NPN

ZX2-LDA11

PNP

ZX2-LDA41

Accessories (order separately)

These are not included with the sensor head or amplifier unit.

Please order as necessary.

Calculating unit

 

Order code

Calculating unit

ZX2-CAL

Sensor head extension cables 1

Cable length

Order code

1 m

ZX2-XC1R

4 m

ZX2-XC4R

9 m

ZX2-XC9R

20 m

ZX2-XC20R

Mounting brackets

Applicable Sensor Heads

Appearance

Contents

Order code

ZX2-LD50V

ZX2-LD50L

ZX2-LD50

 

Mounting Bracket: 1

Nut plate: 1

Phillips screws (M3×30): 2

E39-L178

ZX2-LD100L

ZX2-LD100

 

 

E39-L179

Specifications

Diffuse reflective Sensor Heads

Item Model

ZX2-LD50L

ZX2-LD50

ZX2-LD100L

ZX2-LD100

Optical system

Diffuse reflective

Light source (wave length)

Visible-light semiconductor laser with a wavelength of 660 nm and an output of 1 mW max.

EN class 2,FDA class II *5

Measurement center point

50 mm

100 mm

Measurement range

±10 mm

±35 mm

Beam shape

Line

Spot

Line

Spot

Beam size1

Approx. 60 µm×2.6 mm

Approx. 60 µm dia.

Approx.110 µm×2.7 mm

Approx.110 µm dia.

Resolution2

1.5 µm

5 µm

Linearity3

±0.05% F.S. (40 to 50 mm)

±0.1% F.S. (40 to 50 mm)

±0.05%F.S. (65 to 100 mm)

±0.1%F.S. (65 to 100 mm)

±0.1% F.S. (entire range)

±0.15% F.S. (entire range)

±0.1% F.S. (entire range)

±0.15% F.S. (entire range)

Temperature characteristic4

0.02% F.S./°C

Ambient illumination

Incandescent lamp: 10,000 lx max. (on light receiving side)

Ambient temperature

Operating: 0 to 50°C, Storage: -15 to 70°C (with no icing or condensation)

Ambient humidity

Operating and storage: 35% to 85% (with no condensation)

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute.

Vibration resistance (destruction)

10 to 150 Hz, 0.7-mm double amplitude, 80 minutes. each in X,Y,and Z directions

Shock resistance (destruction)

300 m/s 2 3 times each in six directions (up/down,left/right,forward/backward)

Degree of protection

IEC60529, IP67

Connection method

Connector connection (standard cable length: 500 mm)

Weight (packed state)

Approx.160 g (Sensor Head only: Approx.75 g)

Materials

Case and cover: PBT (polybutylene terephtahalate), Optical window: Glass, Cable: PVC

Accessories

Instruction sheet, Ferrite core, Laser warning label (English), FDA certification label

Regular-reflective Sensor Heads

Item Model

ZX2-LD50V

Optical system

Regular reflective

Light source (wave length)

Visible-light semiconductor laser with a wavelength of 660 nm and an output of 0.24 mW max. EN class 1, FDA class I

Measurement center point

48 mm

Measurement range

±5 mm

Beam shape

Spot

Beam size2

Approx. 60 µm dia.

Resolution3

1.5 µm

Linearity4

±0.3% F.S. (entire range)

Temperature characteristic5

0.06% F.S./°C

Ambient illumination

Incandescent lamp: 10,000 lx max. (on light receiving side)

Ambient temperature

Operating: 0 to 50°C, Storage: -15 to 70°C (with no icing or condensation)

Ambient humidity

Operating and storage: 35% to 85% (with no condensation)

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute.

Vibration resistance (destruction)

10 to 150 Hz, 0.7-mm double amplitude, 80 minutes. each in X,Y,and Z directions

Shock resistance (destruction)

300 m/s 2 3 times each in six directions (up/down,left/right,forward/backward)

Degree of protection

IEC 60529, IP67

Connection method

Connector connection (standard cable length: 500 mm)

Weight (packed state)

Approx.160 g (Sensor Head only: Approx.75 g)

Materials

Case and cover: PBT (polybutylene terephtahalate), Optical window: Glass, Cable: PVC

Accessories

Instruction sheet, Ferrite core, Laser warning label (English)

Note: False detection outside the measurement range can occur in the case of an object with high reflectance.

Amplifier units

Item

ZX2-LDA11

ZX2-LDA41

Measurement period6

Min 30 μs

Response time

60 µs, 120 µs, 240 µs, 500 µs, 1 ms, 2 ms, 4 ms, 8 ms, 12 ms, 20 ms, 36 ms, 66 ms, 128 ms, 250 ms, 500 ms

Analog output7

4 to 20 mA, Max. load resistance: 300Ω, ±5VDC or 1 to 5 VDC, Output impedance: 100Ω

Judgement outputs (HIGH/PASS/LOW: 3 outputs), error output

NPN open-collector outputs, 30 VDC, 50 mA max.(residual voltage: 1 V max. for load current 10 mA max.,2 V max. for load current above 10 mA)

PNP open-collector outputs, 30 VDC, 50 mA max.(residual voltage: 1 V max. for load current 10 mA max., 2 V max. for load current above 10 mA)

Laser OFF input, zero reset input, timing input, reset input, bank input

ON: Short-circuited with 0-V terminal or 1.5 V or less
OFF: Open (leakage current: 0.1 mA max.)

ON: Supply voltage short-circuited or supply voltage within 1.5 V
OFF: Open (leakage current: 0.1 mA max.)

Functions

Smart tuning, scaling, sample hold, peak hold, bottom hold, peak-to-peak hold, self-peak hold, self-bottom hold, average hold, zero reset, On-delay timer, OFF-delay timer, keep/clamp switch, (A-B)calculations8, thickness calculation3, mutual interference prevention3, laser deterioration detection, bank function (4 banks)

Indications

Judgement indicators: HIGH (orange), PASS (green), LOW (orange), 11-segment main display (red), 11-segmentsub-display (orange), laser ON (green), zero reset (green), enable (green), menu (green), HIGH threshold (orange), LOW threshold (orange)

Power supply voltage

10 to 30 VDC, including 10% ripple(p-p)

Power consumption

3,000 mW max. with power supply voltage of 30 VDC and power supply current of 100 mA (with Sensor connected)

Ambient temperature

Operating: 0 to 50°C, Storage: -15 to 70°C (with no icing or condensation)

Ambient humidity

Operating and storage: 35% to 85% (with no condensation)

Dielectric strength

1,000 VAC, 50/60 Hz for 1 min.

Vibration resistance
(destruction)

10 to 150 Hz, 0.7-mm double amplitude, 80 min. each in X,Y,and Z directions

Shock resistance
(destruction)

300 m/s 2 3 times each in six directions (up/down,left/right,forward/backward)

Degree of protection

IEC60529, IP40P

Connection method

Prewired (standard cable length: 2 m)

Weight (packed state)

Approx. 200 g (unit only: Approx.135 g)

Materials

Case: PBT(polybutylene terephtahalate), Cover: Polycarbonate, Display: Acrylic resin, Button: Polyacetal, Cable: PVC

Accessories

Instruction sheet

Calculating unit

Item

ZX2-CAL

Applicable amplifier units

ZX2-LDA11/ZX2-LDA41

Current consumption

12 mA max. (supplied from the smart sensor amplifier unit)

Ambient temperature

Operating: 0 to 50°C, storage: -15 to 70°C (with no icing or condensation)

Ambient humidity

Operating and storage: 35% to 85% RH (with no condensation)

Connection method

Connector

Dielectric strength

1,000 VAC, 50/60 Hz for 1 min

Insulation resistance

100 MΩ (at 500 VDC)

Vibration resistance (destructive)

10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions

Shock resistance (destructive)

300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)

Materials

Case: PBT (polybutylene terephthalate), Display: Acrylic resin

Weight (packed state)

Approx. 50 g

Accessories

Instruction sheet


1. Extension cables cannot be coupled and used together.

2. Beam size: Defined as 1/e 2 (13.5%) of the central intensity at the smallest value of diameter for the measurement range (typical value) False detections can occur in the case there is light leakage outside the defined region and the surroundings of the target object have a high reflectance in comparison to the target object.

3. Resolution: indicates the degree of fluctuation (±3σ) of analog output when connected to the ZX2-LDA. (The measured value is given for the center distance for OMRON’s standard target object (diffuse-reflective models: white ceramic object, regular-reflective models: 1/4 λ flat mirror) when the response time of the ZX2-LDA is set to 128 ms.)
Indicates the repetition accuracy for when the workpiece is in a state of rest. Not an indication of distance accuracy. Resolution performance may not be satisfied in a strong electromagnetic field.

4. Linearity: indicates the error with respect to the ideal straight line of the displacement output in the case of measuring Omron’ s standard target object. Linearity and measured value may vary depending on target object. F.S. indicates the full scope of the measurement range. (ZX2-LD50 (L): 20mm)

5. Temperature characteristic: Value for the case the space between the sensor head and Omron’s standard target object is secured by an aluminum jig. (Measured at the measurement center distance)

*5 These Sensors are classified as Class 2 laser devices for diffuse-reflective models and Class 1 for regular-reflective models under EN 606825-1 and the regulations of Laser Notice No. 50 for FDA certification. CDRH registration has been completed for diffuse-reflective models and is scheduled for regular-reflective models.

6. In the case of Omron’s standard target object (white ceramic)

7. Configure current output (4 to 20mA) and voltage output (±5 V or 1 to 5 V) by MENU mode.

8. Calculating unit (ZX2-CAL) is necessary.

1. Extension cables cannot be coupled and used together.

2. Beam size: Defined as 1/e 2 (13.5%) of the central intensity at the smallest value of diameter for the measurement range (typical value) False detections can occur in the case there is light leakage outside the defined region and the surroundings of the target object have a high reflectance in comparison to the target object.

3. Resolution: indicates the degree of fluctuation (±3σ) of analog output when connected to the ZX2-LDA. (The measured value is given for the center distance for OMRON’s standard target object (diffuse-reflective models: white ceramic object, regular-reflective models: 1/4 λ flat mirror) when the response time of the ZX2-LDA is set to 128 ms.)
Indicates the repetition accuracy for when the workpiece is in a state of rest. Not an indication of distance accuracy. Resolution performance may not be satisfied in a strong electromagnetic field.

4. Linearity: indicates the error with respect to the ideal straight line of the displacement output in the case of measuring Omron’ s standard target object. Linearity and measured value may vary depending on target object. F.S. indicates the full scope of the measurement range. (ZX2-LD50 (L): 20mm)

5. Temperature characteristic: Value for the case the space between the sensor head and Omron’s standard target object is secured by an aluminum jig. (Measured at the measurement center distance)

*5 These Sensors are classified as Class 2 laser devices for diffuse-reflective models and Class 1 for regular-reflective models under EN 606825-1 and the regulations of Laser Notice No. 50 for FDA certification. CDRH registration has been completed for diffuse-reflective models and is scheduled for regular-reflective models.

6. In the case of Omron’s standard target object (white ceramic)

7. Configure current output (4 to 20mA) and voltage output (±5 V or 1 to 5 V) by MENU mode.

8. Calculating unit (ZX2-CAL) is necessary.

Har du et spørgsmål?

Vi er klar til at hjælpe.

Kontakt os

Abonnér på produktopdateringer

Nyhedsbreve om produktinnovationer, løsninger og serviceydelser direkte i din indbakke.

Tak for din tilmelding til Omrons nyhedsbrev. Du vil i løbet af kort tid modtage en e-mail fra os, som indeholder et link hvormed du aktiverer din tilmelding til nyhedsbrevet. Denne metode anvendes i henhold til lovgivningen for at sikre, at ingen kan misbruge din e-mail addresse.

Vi har desværre tekniske problemer. Din formular er ikke modtaget. Vi undskylder og beder dig om at prøve igen senere. Detaljer: [details]

Download

Produktdokumentation

Download datablade, manualer og brochurer.

Gennemse downloadcenter

Kurser

Bliv uddannet af vores bedste ingeniører. Fra begynder til udvidet niveau.

Se tilgængelige kurser